Skip to menu


LED Dimming Module for Level 2


LED Dimming Module for Level 2
LED Dimming Module
 Up to 32 LDM (LED Dimming Module) in RLCM are connected and installed in each LED lighting, Dimming and On/ Off control of LED lighting. Program settings are made on the IGS Touch Switch or STS. The LDM-L2 Series is classified into various types according to the type of output stage.
Main Feature
…Apply to connect to a CAN Communication network.
…Photo adjustment function by 254 steps.
…16 sets of Scene & Group setting function.
…DATA Line connects to LAN Cable CAT.6. 4pr (RJ45)
…Maximum Communication Distance : 500M
…Address Setting Method : Select the random address by checking the isoline of the site in STS or MR BLE APP.
…LDM has an Address switch that allows to select up to 16 Group. Can set up to 16 Address with this address switch.
…Dimming range : 1% ~ 100%
…Dimming times : Program
…Type of output : Normal type is a module that is directly connected to LED luminaire, and there are modules to give PWM and 0-10V signal to SMPS (LED Driver), respectively.
…LED lighting can be applied to various types of lighting such as flat panel lighting (downlight), downlight, LED fixture and can be controlled through CAN communication of RLCM.
…Connect LAN Cable CAT.6. 4pr to RJ45 Jack which is prepared for each LDM2-L2.
…Ballast of LED lighting shall use ballast less than 180W when output voltage of constant voltage method is below 60V / 3A.
…The LDM-2 is mounted with screws or magnets next to the ballast at the back of the LED luminaire.
…Able to set the address and program of each LDM through the setting buttons and screen of IGS Touch Switch and STS.
…Up to Maximum of 32 LDM-2 can be connected on one RLCM, allowing Individual/ Group/ Scene control
…16 GROUP can be set
…16 SCENE can be set
…Fade Time can be set
…Fade Rate can be set
…Min/Max. Level can be set
…Controllable by Occupancy sensor
…Controllable by Photo sensor
Dimension of Layout
…LED Minimum 10W - Maximum 180W type
…Environment Condition : -10℃ ~ 55℃, 0~95% RH
…Input Power : DC 10~60V Voltage
…Power consumption : 12 ~ 50W
…Communication Method : CAN Communication
…Maximum Communication Distance : 500M
…Communication Cable & Connector : CAT.6. 4pr & RJ45 Jack
…Output Power (POut) : Maximum 180W
…Output Voltage (VOut) : 12~60VDC (LDM-L2-n only)
…Outout Current (IOut) : Maximum 3,000mA (LDM-L2-n only)
…Dimming Range : 1~100%
…LDM-pwm and LDM-010 are PWM and 0-10V Signal only of SMPS, respectively.

Connection Diagram

Installation Guide

Semi-finished from available
…It is available in PCB form so that our LDM-2 can be used as an integrated ballast.
…Using semi-finished product of LDM-2, use inside the ballast.
…See the illustration on below.

Product List