메뉴 건너뛰기

XE Basic

LED DALI Module with Occupancy

 

 

LDM w/ Occ.
 
Full Lighting Controls - DALI System
 

The LDM/w.Occ is the Module that performs the DALI Control through the DALI Protocol which is connected to the DALI Master. The Occupancy Sensor is built-in to enable the interlocking control for the occupancy.
 
Main Feature
 

…DALI PROTOCOL INTERFACE.
…256 Steps of Level Control for LED.
…16 sets of Scene Setting Functions
…16 sets of Group Setting Functions
…DALI Standard : IEC 62386
…-Baud rate : 1,200 BPS
…SYSTEM Size : 64 Units
…Data : Individual ON/OFF Control, Individual Dimming Control,
   Lamp Status/Alarm Signal, Ballast Status/Alarm Signal.
…Dimming Range : 1% ~ 100%
…Dimming Times : Program
…Do not require a separate shielded communication cables, able to construct with general cable or cable
   wiring.
…When constructing the cable, able to use the 5C cable (3C-L/N/E, 2C-DALI). Also without installing a
   separate communication line, construction is possible.
…No need to distinguish between the polarity of communication line

 
Application

The LDM w/ Occ is the Module that performs the DALI Control through DALI Protocol which is connected to DALI Master.
The DALI Master is connected to the Full 2-Wire System with no polarity. This is the indispensable device that enables the On/Off, Dimming, Schedule, Pattern, Scene, Individual, and Group Control for 64 EA. of LED DALI Modules for LED Fixtures. This device is made with the existing LDM that is built-in wish motion detecting sensor(infrared sensor) to perform the Individual, Group, On/Off and Min/Max Dimming Control. Especially when it is introduced into the coneference room, it is automatically turned On/Off the LED Lighting to perform the Energy Saving Effect.
Also, this device has it's own function(Hardware Min. Max.) to easily interface with LED Fixtures.

 
Specification

…LED 12~180W Type
…Operation Environment : -10℃ ~ 60℃, 0~95% RH
…Input Power: AC 80~265V Free Voltage
…Consume Power:12~180W
…Occupancy Distance Range: 5m
…Able to switch the Enable/Disable function for Occupancy Detection
…Communication Method: DALI
…Maximum Communication Distance:300M
…Input Voltage: 12~60 VDC
…Output Power(POut): Max. 180W
…Output Voltage(VOut): 12 - 60VDC
…Output Current(IOut): Max.3A
…Dimming Range: 1 - 100%
…OverLoad Protection: Yes
…Short Circuit Protection : Yes
Dimension of Layout
Connection Diagram