메뉴 건너뛰기

XE Basic

LED Dimming Module

LDM-L2

Lighting Controls-RLCM

Up to 32 LDM (LED Dimming Module) in RLCM are connected and installed in each LED lighting, Dimming and ON/OFF contol of LED lighting. Program settings are mad on the IGS Touch Switch or STS. The LDM-L2 Series is classified into various types according to the type of output stage.
Feature

…Apply to connect to a CAN Communication network.
…Photo adjustment function by 254 steps
…16 sets of SCENE & Group Setting Function
…DATA Line connects to LAN Cable CAT.6.4pr (RJ45)
…Max. Comm. Distance 500m
…Address Setting Method:Select the Random Address by checking the isoline of the site in STS or "MR BLE" APP.
…LDM has an Address switch that allows to select up to 16 Group. Can set up to 16 Address with this address switch.
…Dimming range : 1%~100%
…Dimming times : Program
…Type of output : Normal type is a module that is directly connected to LED luminaire, and there are modules to give PWM and 0-10v signal to SMPS (LED Driver), respectively.
Operation

…LED lighting can be applied to various types of lighting such as flat panel lighting(downlight), downlight, LED Bard and can be controlled through CAN communication of RLCM.
…cONNECT LAN Cable CAT.7. 4pr to RJ45 Jack which is prepared for each LDM2-L2
…Ballast of LED lighting shall use ballast less than 180W when output voltage of constant voltage method is below 60V / 3A
…The LDM-2 is mounted with screws or magnets next to the ballast at the back of the LED luminaire.
…Able to set the address and program of each LDM through the setting button and screen of IGS Touch Switch and STS
Specification

…LED Min. 10W - Max. 180W Type
…Environment Condition : -10 ~ 55℃, 0~95% RH
…Input Power : DC 10~60V
…Power consumption : 12 ~ 50W
…Communication Method : CAN Communication
…Max. Comm. distance : 500m
…Communication Cable & Connector : CAT.6 4pr & RJ45 Jack
…Output Power(POut) : Max. 180W
…Output Voltage(VOut) : 12 ~ 60 VDC (LDM-L2-n only)
…Output Current(Out) : Max. 3,000mA (LDM-L2-n only)
…Dimming Range : 1~100%
…LDM-pwm and LDM-010 are PWM and 0-10v Signal only for SMPS, respectivly
Dimension

Application

…Up to Maximum of 32 LDM-2 can be connected on one RLCM, allowing Individual/Group/Scene control
…16 Group can be set
…16 SCENE can be set
…Fade Time can be set
…Fade Rate can be set
…Min/Max. Level can be set
…Controllable by Occupancy sensor
…Controllable by Photo sensor

Connection Diagram
Installation Guide
Semi-finished from available

…It is available is PCB form so that our LDM-2 can be used as an integrated ballast.
…Using semi-finished product of LDM-2, use inside the ballast.
…See the illustration on the side

Product List