Skip to menu

MRBAS

DALI System

Application solution for DALI System
  Our DALI System is connected to our On & Off System and operated properly. DALI MASTER is connected to ELC Network up to 999 EA, and one DALI MASTER is controlled by connecting 64 DALI Dimming Modules.

 The DALI Master is performing the role of converter that interface with the product (DALI Module) for using the DALI Protocol that is connected to ETLC Communication network.
Main Feature about DALI System
…ETLC / DALI Protocol Converting
…Connect Ballast and 64 EA of DALI Module
…16 EA of Scene Setting Function.
…Setting for each DALI Module : Group, Scene and Etc.
…DALI Master is able to connect maximum of 1,000 at ETLC BUS and single system is able to control the maximum 64,000 EA of DALI Module.


This DALI Master is able to connect up to max. of 1,000 EA at existing lighting control data-line by 000~999 address. The each of DALI Master is able to connect up to max. of 64 EA of DALI Module and it is able to control the On/ Off and Dimming for max. of 64,000 EA of LED Lighting. The DALI Master is able to operate with existing ELC Network. It can receive the input signal from sensor and switch that connected at ELC Network to control the Preset, Pattern and Dimming. Also, the Dimming control by the Photo sensor and On/ Off control and Dimming Control by occupancy sensor is possible. The power savings are enhanced greatly. Also, from the central computer, controlling the schedule (Time-Zone), group, pattern is possible by the program. It shows the Dimming Level in percent (%) to suitably used in Lighting Control Management.
Main Features about DALI System’s Products

DALI-M
DALI MASTER
The DALI master is performing the role of converter that interface with the product (DALI Module) for using the DALI Protocol that is connected to ETLC Communication network. From this single DALI Master, connected the DALI Sensor of 64 EA of DALI Module, to control the Dimming and several Scene, Pattern, Schedule and On/Off by LED Lighting.
LDM
LED DALI Module
…DALI Protocol interface
…Photo adjustment function by 256 steps
…16 sets of Scene Setting Function
…Group Setting function
…DALI Protocol : IEC 62386
…Baud Rate : 1,200 BPS
…System Size : 64 units
…Data : Individual On/Off control, Individual Dimming control, Lamp Status/Alarm Signal, Ballast Status/ Alarm Signal.
…Dimming Range : 1% ~ 100%
…Scenes : 16 Scenes
…Dimming times : Program

LDM w/ Occ
Occupancy Sensor
The LDM w/ Occ is the Module that performs the DALI Control through DALI Protocol which is connected to DALI Master. The DALI Master is connected to the FULL 2-Wire System with no polarity. This is the indispensable device that enables the On/Off, Dimming, Schedule, Pattern, Scene, Individual, and Group control for 64 EA. of LED DALI Modules for LED Fixtures. This device is made with the existing LDM that is built-in with motion detecting sensor (infrared sensor) to perform the individual, Group, On/Off and Min/Max Dimming Control. Especially, when it is introduced into the conference room, it is automatically turned On/Off the LED Lighting to perform the Energy Saving Effect.

DALI - PH
DALI - Photo Sensor
The DALI Photo Sensor is connected to the same communication line as existing DALI Module. It is applied as Photo Sensor Control for the 64 EA. of DALI Modules.

The Photo Sensor is applied in the following two types.
…It is attached to the LDM (DALI Dimming Module) itself and operates as Photo Sensor for only one LED Fixture.

…By the one DALI-PH Sensor, the 64 EA. of LDMs can be controlled for the Photo Control.

When Changing the Partition, control the program resetting
Before change / 2 Group


After change / 2 Group






With introduction of
DALI System, it is possible to
set the changed lighting
circuits from the Smartphone App
Program without any
piping / wiring when
changing the partition.

Up