Browser Size :
*
Red5-MODULE-8xp
Red5 System
Overview
Red5-MODULE-8xp is an I/O module for the Red5 system. It consists of 8 universal points and can be configured with the exact combination of inputs and outputs required for the control target.
It can be easily added to the existing system when future expansion is required.
One RED5-PLUS-ROOM supports 4 basic 8 I/O modules, and by using 3 Power Injector Modules, up to 12 total 8 I/O modules can be connected.
It can be easily added to the existing system when future expansion is required.
One RED5-PLUS-ROOM supports 4 basic 8 I/O modules, and by using 3 Power Injector Modules, up to 12 total 8 I/O modules can be connected.
Feature
- 8 universal points for input and output
- Software configurable I/O
- Supports lighting control with dimming function
- DIN rail mounting type (EN 50022-35*7.5)
- Modular design provides flexibility, easy service, and reduced upgrade / expansion cost
Operation
When using BI/BO wiring, dry contact wiring must be used. For AI wiring, set 4~20mA, 10KOhm, or 0~10VDC through software before use.
Application
The Red5 system is a complete modular solution providing HVAC, access control, lighting control, and more. It applies multiple protocols and I/O points in one unit.
The Red5 system improves room control, avoids redundant equipment, and provides a satisfying experience with lower energy costs.
The Red5 system improves room control, avoids redundant equipment, and provides a satisfying experience with lower energy costs.
Speicfication
- Power Consumption: 4W
- Universal POINT: 8
- Maximum Output: 10V
- AI: 0~5VDC
- AI: 4~20mA
- AI: 10KOhm
- AI/AO: 0~10VDC
- DI/DO: Dry Contact
Network
Installed on the internal BUS of RED5-PLUS-ROOM or on the internal BUS of RED5-EXPAND-04 connected through NET 3 activated Red5 BUS.
Dimension
User Interface
Layout
System Diagram
Connect Diagram
